RT_Repair Kit

Door Repair Kit

$8.00

RT Sliding Door Contact Rear Quarter
1. Trim Panel Removed – Per manual
2. Dual Lock Stack with Bridg-it Supplied by Argent
3. Remove Standoff Under Shoddy
4. Cut Shoddy
5. Carefully Drill Hole thru module at a at a diameter of 8mm or 5/16” at the Center of the formation (Just forward of Part Number Tag)
6. Fully seat White Christmas Tree into 8mm Hole
7. Transfer location from module and scribe
8. Clean and Apply Primer / Promoter at Locations Shown
9. Firmly pressurize part at scribed location for 5 Seconds
10. Seat Trim Panel and Press at “new” attachment location
11. Validate Trim Panel Clearance to Rear Quarter (Min Gap is 6mm)
12. Firmly pressurize part at scribed location for 5 Seconds

Warning

Deleting file, please wait...

Compare
SKU: 7 18122 68578 7 Categories: , Tags: , ,
Weight .2 lbs
Dimensions 11 x 1 x 7.5 in